Smith Paints CRU'86 Chemical Resistant Urethane DIRECT SHIP

Smith Paints CRU'86 is a High Performance, Ready-to-Use, High Gloss, 86% Solids, Aliphatic, Solvent-based Chemical Resistant Polyurethane topcoat which yields a highly light reflective, smooth finish when applied at 400 sq.ft. per gallon as a gloss finish over a properly prepared coating or primer layer.

EH CRU has a long working time, good gloss retention, high abrasion and chemical resistance making it an ideal choice for aircraft hangars, as a gloss topcoat and in moderate traffic environments which desire a high gloss finish with less odor during installation and higher performance vs. traditional solvent-based Polyurethane topcoats.   

• For solid colors, Smith Paints CRU accepts Smith Paints ISC Color Packs (sold separately)
• For a low sheen finish, add A/O 325 Aluminum Oxide Low Sheen Powder Additive (sold separately – NOT intended to improve slip resistance)
  • Also helps to reduce traffic pattern development
  • Application as a Low Sheen finish should be dip & roller applied out of a paint tray at 500 to 600 sq.ft. per gallon 
• Traction additive, such as Resin Sand, should be incorporated where necessary to increase slip resistance

RECOMMENDED AS TOPCOAT FOR:

• Industrial, Commercial & Retail Environments
• Aircraft Hangar Floors
• Showrooms
• Museums
• Pharmaceutical Floors
• Interior Decorative Concrete
• Metallic & Luster floor coatings

HIGHLIGHTS:

• Good Gloss Retention & Light Reflectivity
• High Performance – Improves service life of coating system
  • Abrasion Resistant – Very Durable
  • Chemical & Stain Resistant
• U.V. Stable
• Long Working time
• Easy to Clean
• Resistant to Hot Tire Pickup
• Less Odor than Traditional Solvent-based, Moisture-Cured Polyurethanes
• VOC compliant in most regions – <99 g/L