Poly-WB - Waterborne Polyester Polyurethane Sealer

Smith’s Poly-WB is a 2-Component, High Performance Waterborne Polyester Polyurethane sealer used as a hard, durable protective or maintenance wear surface over decorative concrete, pavers, concrete stains, etc. with heavy foot traffic exposure.  Developed for interior or exterior wear surfaces in residential & commercial installations to protect against long-term chalking in high U.V. exposure environments & for greater film thickness capabilities, better gloss retention, better chemical & stain resistance versus traditional 2-Component water-based Polyurethanes.  Direct-to-concrete, stone and paver applications require a primer of either Smith’s Poly-SB (achieves wet look) or Smith’s Poly-SEAL (natural appearance).

Available in Semi-Gloss & Low Sheen finishes.

Recommended as a Final Topcoat for Commercial & Residential:

• Decorative & Stamped Concrete
• Concrete Countertops
• Terrazzo
• Garage Floor Coatings
• Sealer for Vinyl Chip resinous coating systems
• Pavers

HIGHLIGHTS:

• Good Pot-life – 2 hours at 75°F / 50% Humidity
• Ultra Violet light stable
• Very Good Stain & Chemical Resistance
• High Performance – Much more durable than traditional solvent-based Acrylic Sealers
• Easy to Clean & Maintain
• Wet Look – Enhances Colors
• Non-Blushing
• Dries Clear
  • Solid Colors  possible with the addition of Smith’s WSC Waterborne Solid Color Packs (Sold Separately)
• Hot Tire Pickup Resistant
• Low VOC’s – Meets Source Specific Standards Rule 1113 established by AQMD in California